FreeBSD Data Rescue

出自KMU Wiki

(修訂版本間差異)
跳轉到: 導航, 搜索
在2009年6月22日 (一) 10:36所做的修訂版本 (編輯)
Cch (對話 | 貢獻)
(Using gptar)
←上一個
當前修訂版本 (2018年10月30日 (二) 09:27) (編輯) (撤銷)
Cch (對話 | 貢獻)

 
(10個中途的修訂版本沒有顯示。)
第1行: 第1行:
-在 FreeBSD 利用自由軟體搶救檔案 +Using FreeBSD and Open-Source Tools to rescue data
 + 
 +在 FreeBSD 下使用搶救資料的工具
==UFS fsck -y failed== ==UFS fsck -y failed==
第5行: 第7行:
If fsck -y UFS failed If fsck -y UFS failed
- fsck -y+<pre>
- ...+# fsck -y
- UNKNOWN FILE TYPE I=8408063+...
- UNEXPECTED SOFT UPDATE INCONSISTENCY+UNKNOWN FILE TYPE I=8408063
- CLEAR? yes+UNEXPECTED SOFT UPDATE INCONSISTENCY
- fsck_4.2bsd: bad inode number 8408064 to nextinode+CLEAR? yes
 +fsck_4.2bsd: bad inode number 8408064 to nextinode
 +</pre>
Try to mount UFS read-only Try to mount UFS read-only
- mount -r+<pre>
- find home -type f -and -size -1G -print > /root/T2+# mount -r /dev/daXs1d /mnt
- tar -T /root/T2 -cf - | ssh admin@bak "cat > host-home.tar"+# find /mnt -type f -and -size -1G -print > /root/T2
 +# tar -T /root/T2 -cf - | ssh admin@bak "cat > host-home.tar"
 +</pre>
If ls can not see any files or directories, you may try If ls can not see any files or directories, you may try
第25行: 第31行:
* /usr/ports/sysutils/autopsy * /usr/ports/sysutils/autopsy
- e.g. Using autopsy+Using autopsy
- sudo autopsy localhost+<pre>
- add case -> add host -> add image -> ...+# autopsy localhost
 + 
 +using browser to connect http://localhost
 + 
 +add case -> add host -> add image -> ...
 +</pre>
==Bad Partition Table== ==Bad Partition Table==
 +
 +===Using testdisk to check and undelete partitions===
 +
 +Path: /usr/ports/sysutils/testdisk
 +
 +Info: Tool to check and undelete partitions
 +
 +WWW: https://www.cgsecurity.org/wiki/TestDisk
 +
===Using magicrescue=== ===Using magicrescue===
第53行: 第73行:
* zip * zip
- e.g.+<pre>
- 將欲搶救的硬碟拆下,用 USB-to-ATA/SATA 轉接器+First to get the image of the disk or partition
- magicrescue -r msoffice -r jpeg-jfif -r jpeg-exif -d ~/output /dev/da0+ 
- 或 (避免多次讀取 /dev/da0)+# dd if=/dev/daX of=IMG_DIR/daX.img
- dd if=/dev/da0 of=/big/da0img+ 
- magicrescue -r msoffice -r jpeg-jfif -r jpeg-exif -d ~/output /big/da0img+Then using magicrescue to rescue MS-Office and JPEG files
 + 
 +# magicrescue -r msoffice -r jpeg-jfif -r jpeg-exif -d OUTPUT_DIR IMG_DIR/daX.img
 +</pre>
===Using foremost=== ===Using foremost===
第64行: 第87行:
===Using gpart=== ===Using gpart===
-===Reference===+==Reference==
[http://www.student.dtu.dk/~s042078/magicrescue/manpage.html magicrescue] [http://www.student.dtu.dk/~s042078/magicrescue/manpage.html magicrescue]
 +
 +[[Category:資訊處]] [[Category:圖書資訊處]] [[Category:資訊服務]]

當前修訂版本

Using FreeBSD and Open-Source Tools to rescue data

在 FreeBSD 下使用搶救資料的工具

目錄

[編輯] UFS fsck -y failed

If fsck -y UFS failed

# fsck -y
...
UNKNOWN FILE TYPE I=8408063
UNEXPECTED SOFT UPDATE INCONSISTENCY
CLEAR? yes
fsck_4.2bsd: bad inode number 8408064 to nextinode

Try to mount UFS read-only

# mount -r /dev/daXs1d /mnt
# find /mnt -type f -and -size -1G -print > /root/T2
# tar -T /root/T2 -cf - | ssh admin@bak "cat > host-home.tar"

If ls can not see any files or directories, you may try

  • /usr/ports/sysutils/ffs2recov
  • /usr/ports/sysutils/scan_ffs
  • /usr/ports/sysutils/sleuthkit
  • /usr/ports/sysutils/autopsy

Using autopsy

# autopsy localhost

using browser to connect http://localhost

add case -> add host -> add image -> ...

[編輯] Bad Partition Table

[編輯] Using testdisk to check and undelete partitions

Path: /usr/ports/sysutils/testdisk

Info: Tool to check and undelete partitions

WWW: https://www.cgsecurity.org/wiki/TestDisk


[編輯] Using magicrescue

/usr/ports/sysutils/magicrescue

magicrescue can rescue following file types (ls /usr/local/share/magicrescue/recipes/)

  • avi
  • flac
  • gzip
  • mp3-id3v1
  • perl
  • canon-cr2
  • gimp-xcf
  • jpeg-exif
  • mp3-id3v2
  • png
  • elf
  • gpl
  • jpeg-jfif
  • msoffice
  • zip
First to get the image of the disk or partition

# dd if=/dev/daX of=IMG_DIR/daX.img

Then using magicrescue to rescue MS-Office and JPEG files

# magicrescue -r msoffice -r jpeg-jfif -r jpeg-exif -d OUTPUT_DIR IMG_DIR/daX.img

[編輯] Using foremost

[編輯] Using gpart

[編輯] Reference

magicrescue